Insulation Contractor in Valley, AL - Attics and Crawl Spaces Sealed First
Quality Auburn Spray Foam Insulation is an insulation contractor based in Auburn, AL, working in Valley on attics, crawl spaces and walls. We seal the gaps first, then insulate, so the insulation isn't fighting a draft.
Older houses and newer ones across Valley
Most of what we insulate in Valley is houses. Some are older homes with low attics and a crawl space underneath, and some are newer ones on the edges of the city with the ductwork running through the attic. Plenty of the older ones have had rooms added over the years, and the calls we get here sound a lot like the ones from Lanett: a cold back bedroom, an upstairs that won't cool down, a power bill that keeps creeping up.
Those older houses usually have a few inches of old insulation that's packed down, with open gaps around pipes, wires and ceiling lights underneath it. That's why we start by looking at what's already up there instead of piling more on top.
Working in Valley: permits, licenses and what moves the price
Permits in Valley come from the city's Planning and Development Department at City Hall, and before we set a start date I check with them about your job, because if it needs a permit, the work waits until that's in hand. The city takes business license applications from companies working here, and the state revenue department says a business in a trade with its own state board should show that board's license before the city issues one, so it's fair to ask any contractor for both. We're licensed and insured. Your price mostly turns on what's already in the attic or crawl space and what has to happen before new insulation goes in, and the estimate spells that out for your house.
I started this business in Auburn in 2013, and Valley is an easy run up I-85, so I still come out and look at every job here myself. The same crew that works in Smiths Station handles Valley jobs, and the schedule usually depends on the work itself, like hauling out old insulation first or keeping you out of the house for the hours spray foam needs to cure.
Services in Valley, AL
Attic air sealing
Older Valley houses usually have open gaps around ceiling lights, plumbing pipes and the attic hatch, and air moving through those gaps is a big part of why a back bedroom stays cold. We seal them with foam and caulk before any insulation goes back over them, because a gap you cover up is still a gap.
Blown-in insulation
Most attics we open here have a few inches of old fill that's settled flat, often deep in the middle and thin at the edges where the ceiling meets the outside wall. Our blown-in insulation, loose fill blown in through a hose, evens that out and tops it up, with baffles at the eaves so the vents stay open.
Insulation removal
Some older attics hold insulation that got soaked by a roof leak years back or is full of droppings, and new material laid on top just hides the problem. We bag it out and clean up first, and if the roof is still leaking, I'll tell you so you can get a roofer out before we insulate.
Crawl space insulation
Cold floors in an older Valley house usually trace back to a crawl space where the insulation is hanging loose or missing altogether. We put it back up tight against the floor above and seal around the pipes coming through, so the floor holds its warmth.
Crawl space vapor barrier
A bare dirt floor under the house lets ground moisture rise into the crawl space, where it works into the insulation and the wood. We lay a vapor barrier, a heavy plastic sheet over the dirt, lapped and taped at the seams so the space underneath stays drier.
Spray foam insulation
Newer houses here often run their ductwork through the attic, and that's when spray foam on the underside of the roof makes sense, because it seals and insulates at once and brings the ducts inside the insulated space. It costs more than loose fill, so if your ducts aren't up there, I'll usually point you toward sealing the gaps and topping up instead.
What older Valley houses ask of the attic
The room over the garage and the upstairs bedrooms tucked under the roof are where people here feel it most, because those rooms have slanted ceilings and short knee walls that were often insulated thin or not at all. We open the knee wall, the short wall between the room and the attic space behind it, seal it and insulate it, and we make sure air still comes in at the eave vents before we close up, so the attic keeps breathing.
Older houses also come with older wiring in the attic. If we find any that looks unsafe, we stop and tell you, since that's an electrician's call, and nothing gets buried under insulation until it's been looked at.
Get a written insulation estimate for your Valley home
We reply to every call or form within one business day and set a time for me to come out to your house in Valley. I look at the attic, crawl space or walls, ask what's bothering you and write up the work in the order we'd do it. The estimate is free, with no pressure and no obligation.
How a Valley job goes
Call or send the form
Call (334) 780-0054 or use the form, and we'll find a time for me to come by your house in Valley. It helps if you're home so you can show me the rooms that bother you.
I look and write it up
I go into the attic, crawl space or walls, see how many inches are already there and what shape they're in. You get a written estimate with each step listed in order, so you can hold it next to another quote and see exactly where they differ.
We check the permit question
Before any work starts, we ask Valley's permit office about your job and pull a permit if they call for one. If they do, we set the start date after it's issued.
Crew installs, I check it
Our crew lead runs the install, and before we leave I look over the work and walk it with you, with the hatch open so you can see the vents are clear and the coverage reaches the edges. The job is backed by our satisfaction guarantee.
Valley insulation questions answered
Do I need a permit for insulation work in Valley, AL?
Valley's permit list doesn't name insulation, so we ask the city's Planning and Development Department about your job before we start and pull a permit if they call for one. The department takes applications for building, electrical, mechanical, plumbing and roofing work, and it answers construction and permit questions at 334-756-5226. If your job does end up under a permit, the city's code changes can also require adding carbon monoxide alarms, and I'll tell you that before we start.
Which building code does Valley, AL use for houses?
Valley uses the 2021 International Residential Code as its own residential code, covering detached one and two family homes and townhouses up to three stories. Other buildings fall under the 2021 International Building Code. The state Home Builders Licensure Board also goes by the code the city adopted when it looks into a licensee's work, so that's the code we work to.
When does a contractor need a state license in Alabama?
Alabama's Home Builders Licensure Board requires residential home builders to renew their license every year, and its law covers homes built for someone else's use, up to three floors and four units, when the cost goes over $10,000. Ask any contractor which state license fits the work they're quoting, and ask to see it.
How do I check if my Valley house is in a flood zone?
Search your address on the state's AlabamaFlood tool, which shows FEMA floodplain data for it. It's worth knowing before any crawl space work, because a crawl space that takes on water is a different job from one that stays dry, and I'll want to see yours either way.
What makes insulation cost more or less in Valley, AL?
The biggest factor is what has to happen before new insulation goes in. Old fill that's soaked or full of droppings has to come out first, every gap around lights, pipes and the hatch takes time to seal, and a tight attic or low crawl space slows the crew down. Spray foam costs more than loose fill, so the choice between them moves the price the most, and your written estimate shows each of these as its own step.
How long does it take before we can go back inside after spray foam insulation?
With spray foam, you and the kids and pets stay out for a set number of hours while it cures, and that re-entry time comes from the foam maker's instructions. I give you the time for the product we'd use when I write the estimate, so you can plan around it. Air sealing and blown-in work usually don't mean leaving the house.
Ask us about your Valley house today
Call (334) 780-0054 or send the form with every question you've got, because I'd rather answer all of them now than have you sign something you don't understand.
