Insulation contractor in Tallassee, AL - older houses sealed, then insulated
Quality Auburn Spray Foam Insulation insulates attics, walls and crawl spaces in Tallassee, AL. We seal the gaps first, then add spray foam or blown-in insulation so drafty rooms and hot upstairs bedrooms hold their temperature better.
Older mill houses and newer homes in Tallassee
Tallassee sits on the Tallapoosa River in the wooded hills of the Piedmont. The mill company built a big part of the city around the turn of the last century, including mill villages on the east and west sides of town. Many of those older frame houses are still lived in, and newer homes on bigger, tree-covered lots sit farther out. We work here the same way we do in Tuskegee and Opelika, one house at a time.
Houses that old usually have a thin, settled layer in the attic, walls with little or nothing in them and floors over an open crawl space, so on a Tallassee job I start by looking at what's already there before we add anything.
What we know about insulating in Tallassee
Permit applications here go to the City of Tallassee's Business License and Permits office, which takes building, electrical, mechanical and plumbing permits and answers at 334-283-6571. Its list doesn't spell out insulation, so whether your job needs a permit is that office's call, and if it does, the start date waits on it. Tallassee also sits partly in Tallapoosa County and partly in Elmore County, so we make sure we're asking the office that covers your address. The same office issues the city business license, and under state rules a business in an occupation the state licenses should show its state board certificate before the city licenses it. Asking a contractor for their Tallassee business license is a fair first check.
We're an insulation contractor in Auburn, AL, licensed and insured, and I started this business in 2013. What moves the price is mostly what we find up there, like how much old insulation has to come out, how many gaps need sealing around the hatch, pipes and lights, how tight the attic or crawl space is to work in, and whether you choose foam or loose fill. The schedule turns on the permit question and the size of the job. I write all of it down in the estimate, step by step, so you can hold it up against another quote.
Services in Tallassee, AL
Attic insulation
In a lot of older Tallassee houses, the attic has a few inches of flattened insulation, and that's why the upstairs runs hot all summer. We measure what's there, seal the gaps, then blow in loose fill through a hose so the edges get covered as well as the middle.
Wall insulation
Many of the older frame houses here were built with empty or nearly empty walls, so the outside rooms feel drafty no matter where the thermostat sits. Our wall insulation work fills those cavities through small holes we patch afterward, so the walls stay in place.
Crawl space insulation
Houses on piers or block foundations sit over an open crawl space, and that's where cold floors in winter come from. We check for moisture and loose wiring first, then insulate the floor from below so the insulation stays up.
Insulation removal
Some attics here hold old insulation that's been flattened by leaks or packed with nests from squirrels and mice off the wooded lots. When it can't be saved, we bag it out and clean the attic floor so the new layer starts on a clean surface.
Attic air sealing
Old houses leak air around the attic hatch, the chimney, plumbing pipes and light fixtures, so a drafty house can stay drafty even under thick insulation. Air sealing closes those gaps before anything gets covered, which lets the insulation do its job.
Crawl space vapor barrier
Damp ground under a crawl space keeps pushing moisture up into the floor framing and any insulation under it. We lay a vapor barrier, heavy plastic sheeting that holds ground moisture down, before we insulate the floor.
What Tallassee summers ask of a house
Long, humid summers bake the attic, and in a lot of houses here the ductwork runs right through it, so the cool air loses ground before it reaches the bedrooms. When the ducts live up there, I'll usually point you toward spray foam on the underside of the roof, because it seals air while it insulates and puts the ducts inside the cooler space, even though it costs more. When they don't, sealing the gaps and topping up the blown-in insulation usually wins.
We often find the eave vents along the edge of the roof buried under old insulation, so the attic can't breathe and moisture starts showing up on the framing. We keep the insulation back from those vents with baffles, short chutes that hold an air path open. If we spot a roof leak, I'll tell you and send you to a roofer, because that repair isn't our work and it has to be fixed before we cover anything.
Get a free on-site insulation estimate in Tallassee
We reply to every call or form within one business day, and there's no obligation. I come out to your Tallassee house myself, look at the attic, crawl space or walls, and write a free estimate with the steps listed in the order we'd do them.
How a Tallassee job goes
Call or send the form
Call (334) 780-0054 or send the form, and we'll get back to you to set a time to come out. Tell us what's bothering you, like a hot bedroom, cold floors or a power bill that keeps climbing, so I know where to look first.
I come out and look
I climb into the attic or crawl space, check how many inches are already up there and ask about the rooms that bother you. You get a written estimate with each step in the order we'd do it, so you know the cost before any work starts.
We settle the permit question
Before work starts, we check with the office for your address and pull any permit the job calls for. Tallassee's permit office takes calls Monday to Friday, 7:30 a.m. to 4 p.m., so we set the start date once we have its answer.
We install and walk it
A crew lead runs the install, with the gaps sealed before anything gets covered. Before we leave, I look over the work myself and walk through it with you.
Tallassee insulation questions answered
How do I schedule a building inspection in Tallassee, AL?
You text the city at 334-452-5504, which is its line for all inspection requests. That number is for inspections only, so permit questions still go to the permit office. If your job has a permit, we'll let you know when the work is ready for the inspector.
When does a home improvement job in Alabama need a licensed home builder?
The Alabama Home Builders Licensure Board counts anyone who builds, remodels, repairs or improves a home on a job costing over $10,000, labor and materials together, as a residential home builder, unless the work falls outside its jurisdiction. You can call the board at 334-242-2230 to check a contractor before you sign. It also requires its licensees to work from a valid written contract.
How much does it cost to insulate an attic in Tallassee?
Most of the cost comes from what's already in your attic and what has to happen before new insulation goes in. The big movers are hauling out old insulation that's wet or dirty, how much sealing the hatch, pipes and lights need, how hard the attic is to get around in, and whether you pick foam or blown-in. My written estimate prices each step so you can see where the money goes.
How long do we have to stay out of the house after spray foam insulation?
You, the kids and the pets stay out while the foam goes on and until the re-entry time, the wait the foam maker sets before anyone comes back inside, has passed. That time comes from the product we're spraying, so I tell you the number before the job is booked. Blown-in insulation is different, and most people stay home while we work.
How long does attic insulation take in an older Tallassee house?
In an older house, most of the crew's time goes into the work before the new insulation, not the blowing itself. Clearing out old insulation, dealing with droppings and sealing every gap is what takes longest, and I'll tell you how long we expect to be in your attic when I write the estimate. The start date also waits on the permit check.
Should I put new insulation on top of the old insulation in my attic?
If the old layer is dry and clean, yes, we usually seal the gaps and add on top of it. If it's been soaked by a roof leak or has droppings in it, it comes out first, because new insulation over a bad layer just hides the problem. My old boss used to say a covered mistake is still a mistake, and that's how I decide.
Talk to us about your Tallassee house
Call (334) 780-0054 or send the form, and if you're already holding another quote, I'll go through it with you and explain plainly where ours is different.
